|
|
|
Meinan Machinery Works, Inc. was established in Japan over 60 years ago to develop and manufacture innovative veneer & plywood machinery. |
Year established : |
1953 |
Business : |
Manufacturer |
ALPHA: ROTARY LATHE
ALPHA: ROTARY LATHE
The ALPHA rotary veneer lathe model ALLF has been developed specifically for peeling small diameter logs into thin face veneer for the production of decorative panels.
The ALPHA rotary veneer lathe model ALLF has been developed specifically for peeling small diameter logs into thin face veneer for the production of decorative panels.
Unlike other Meinan lathe models that have a circumferential drive system, also known as "Gangi", the ALLF lathe uses a special roller bar for driving the block.
This feature permits peeling of veneer without leaving incision marks on the surface, and it also reduces lathe checks on the backside of the veneer. The result is veneer of superior quality and precisely controlled thickness.
The ALLF model is therefore best suited for processing small diameter logs such as they come from plantations or as by-products from forest thinning operations and would normally be classified as chipping material. A substantial increase in value from a low cost raw material could therefore be realized.
Meinan Machinery Works, Inc. was established in Japan over 60 years ago to develop and manufacture innovative veneer & plywood machinery. Over 250 Meinan automatic veneer peeling lines are in operation worldwide, featuring the Meinan Veneer Lathe with circumferential drive system to provide higher full sheet recovery, better veneer quality, and extremely close thickness tolerance. The unique spiked disc drive system allows spindleless peeling with useable veneer all the way down to a 25mm core with no spinouts. The Meinan Green Veneer Composer is the first successful tape composer in the world for splicing random green veneer strips into full sheets to increase dryer utilization and save labor costs. Meinan equipment and production methods can be found in panel and engineered wood plants throughout the world, producing veneer, plywood, and LVL with significant process and efficiency improvements, and most importantly - fast payback. Visit our stand to learn more.
Manufacturer of Plywood & Veneer Machinery;View our presentation
|
| Aristo- Rotary Veneer Lathe Veneer sheet production line
Developed to peel veneer from logs that were difficult to process with a traditional lathe, including extremely hard, soft, and small diameter logs. |
| Hybrid lathe Developed to provide dual use as a conventianal spindle-driven lathe or circumferential drive lathe (Gangi-driven). |
| MDF Splitter TWS The Meinan MDF splitter TWS was developed to enable the splitting of MDF into two thicknesses. To provide a smooth split surface, the pressure bar can be adjusted based on the type of wood being split. |
| Veneer peeling line Enables the peeling of logs with diameter of 140mm to 600mm down to a 32mm diameter. This unique machine also enables the production of high-quality veneer sheets with a smooth peeled surface. | |
|
|