|
Cat Lift Trucks
|
|
 |
4-wheel electric forklift truck
Electric Powered Lift Trucks 1.0 - 5.5 tonnes | | |
 |
Electric Powered Lift Trucks
Electric Powered Lift Trucks 1.0 - 5.5 tonnes | | |
|
|
|
|
C. & E. FEIN GMBH.
|
|
 |
accumulator screwdrivers
accumulator screwdrivers | | |
 |
Belt grinding machines
Belt grinding machines | | |
 |
Core drilling machines
Core drilling machines | | |
 |
Multi-purpose electric tool 14 500 rpm | MSx 315 9,6 V
The universal cordless oscillator for interior fitting and renovation.
| | |
|
|
|
|
C. Otto Gehrckens
|
|
 |
O-ring seal
-rings, produced according to DIN 3771: All current materials: ACM, AU, CSM, CR, EPDM, EPM, FEPM, FFKM, FPM, FYMQ, HNBR, IIR, NBR, NR, PTFE, PVMQ, VMQ.
Inside diameter from 0.74 to 1400 mm; Strength of thread from 0.6 to 30mm
| | |
 |
Sealing ring
| | |
|
|
|
|
Case Packing Systems BV
|
|
 |
Bag infeed systems
CPS manufactures various units which make sure that the bags produced by whatever vertical bag makers will be presented to the bag infeed conveyor towards the CPS casepacker line in such a way that inspection/detection of the bags and rejection of any leaking bags is possible and at the same time making sure that the bags are introduced into the casepacker line in a controlled manner. | | |
 |
SL 105 Side Loader
For vertical positioning of pouches, pillow bags and block bottom bags into cases and trays. Operation of the system: The bags are transported into the machine through an infeed belt. Depending on output requirements the machine is equipped with a single or a double bag loading system by means of two elevator cassettes. | | |
|
|
|
|
Cannon S.p.A.
|
|
 |
Plastics Processing Technologies
CANNON is able to provide complete turnkey solutions for high and low density polyurethane technology , epoxy and CFRP (Carbon Fiber Reinforced Polymer) technologies, from the preforming of the reinforcement to the injection and metering of the chemicals. The dry and wet side of the production process can be perfectly integrated in a tailor-made solution for every customer’s need.
| | |
|
|
|
|
CARPENTER Machinery Co. Ltd
|
|
 |
Optimizing Moveable Multiple Rip Saw
The Optimizing sorting multiple rip saw is ideal for trimming panel and optimized cutting, Properly select a desired cutting mode, then the machine will perform the best combination of cutting according to customer's requirement. | | |
 |
Sorting Cut off machine
The Optimizing sorting cut off saw is designed to cut off knot and defective part. It permits selection and cut off at a time. It's outstanding functions include automatic detection by photoelectric sensor and marking lines on defective parts for cutting off. | | |
|
|
|
|
Cinpres Gas Injection Ltd
|
|
 |
Gas Control - PPC Standard Features
GENERIC GAS CONTROLLER FEATURES
* Precise pressure control using State of the Art Gas Control Module
* Integral in-line gas filters
* Independent control of up to four GCM's on up to two moulding machines
* Full closed loop pressure control
* Start delay plus 5 control phases per cycle, each with ramp and hold time, giving a total of 11 timed control steps per cycle. | | |
 |
Gas Preparation - GENTEC Gas Generation - Low pressure N2 gas generation systems
* A comprehensive range of capacities for generation of N2 gas
* N2 generation by 'pressure swing adsorption', using carbon molecular sieve (CMS) to adsorb Oxygen.
* Integral pre-treatment of inlet compressed air.
* Standard N2 purities from 98% to 99.5%.
* Low pressure gas storage, including recovery capability for recycling gas recovered from gas controllers
* Filtration of low pressure (inc recovered N2) gas. | | |
|
|
|
|
Cognex ID Products
|
|
 |
id products
DataMan™ 7500 Series | | |
 |
Semiconductor and Electronics Products
Cognex has been the leading vision supplier to the semiconductor and electronics industry since its inception in the early 1980’s as a provider of wafer ID solutions. | | |
 |
Vision Guided Robotics
Innovative new products and capabilities from Cognex make integrating vision systems into 2D robotic applications faster and easier than ever before. | | |
|
|
|
|
Con-Slot Screens Development & Trading GmbH
|
|
 |
Con-Slot Screens
| | |
 |
Special Machinery Construction
Design and manufacturing of special machinery for the production and processing of profile wire wrapped screens, especially as a technological unit.. | | |
|
|
|
|
Compressed Air Systems Inc
|
|
 |
30 Gallon Air Compressor
30 Gallon Air Compressor 16CFM@175PSI, Electric start | | |
 |
Air Compressor-Generator
Simple Heavy Duty Air Compressors
12CFM Air Compressor 5000 Watt Generator on 10 gallon, 200PSI rated wheel tank | | |
|
|
|
